Engraving Tool

Apollo Precision Tools DT9706P 39-piece Pink General Tool Set

2011-04-14T05:23:00.001-07:00

Review Apollo Precision Tools DT9706P 39-piece Pink General Tool Set

Buy Cheap Apollo Precision Tools DT9706P 39-piece Pink General Tool Set From Here Now!
This general tool set has the basics you need to complete any task! Includes: 12' tape measure • 8 oz claw hammer • 6" slip joint pliers • Eight SAE Hex Keys: 1/16", 5/64", 3/32", 1/8", 5/32", 3/16", 7/32", 1/4" • Bit Driver • 8" scissors • 10 - 1" CRV screwdriver bits: 1/8", 5/32", 3/16", 1/4", PH1, PH2, PH3, PZ1, PZ2, PZ3 • 10 - 1" CRV screwdriver bits: T10, T15, T20, T25, T27, T30, 1/8" 5/32", 3/16", 1/4" • 18mm plastic utility knife Assembly level/degree of difficulty: No Assembly Required.
Readmore

Technical Details

Chicago Pneumatic Air Scribe # CP 9361

2011-01-29T18:01:00.001-08:00

Review Chicago Pneumatic Air Scribe # CP 9361

Buy Cheap Chicago Pneumatic Air Scribe # CP 9361 From Here Now!
used for writing and engraving
- includes CP9361, air hose, air filter, and carbide tipped stylus
- works on a wide variety of materials including hardened steel and other metals, plastic, glass, and wood
- will write on materials up to 64 Rc hardness
- can be converted for use as a light scaler or hammer for deburring, trimming, or driving pins and removing seized studs
- variable adjustment of power and blow rate using built in throttle regulator
- max blows per minute: 13,500
- length: 5 in.
- air flow: 1.1 cfm
- min. hose bore: 3/16 in.
- sound level: 79 dB(A)
- A CP Tools Chicago Pneumatic quality air scribe engraving pen
Readmore

Technical Details

Engraving Burr Cutter 3/32" Shank - DSB-07

2011-01-05T05:16:00.001-08:00

Review Engraving Burr Cutter 3/32" Shank - DSB-07

Buy Cheap Engraving Burr Cutter 3/32" Shank - DSB-07 From Here Now!
A high-speed engraving cutter designed for precision engraving, made in Swiss, 3/32" (2.4mm) shank. Ideal for detail engraving, carving and routing in wood, fiberglass, ceramics, plastic, jewelry and soft metals.
Readmore

Technical Details

Engraving Burr Cutter 3/32" Shank - DSB-08

2011-01-04T15:28:00.001-08:00

Review Engraving Burr Cutter 3/32" Shank - DSB-08

Buy Cheap Engraving Burr Cutter 3/32" Shank - DSB-08 From Here Now!
A high-speed engraving cutter designed for precision engraving, made in Swiss, 3/32" (2.4mm) shank. Ideal for detail engraving, carving and routing in wood, fiberglass, ceramics, plastic, jewelry and soft metals.
Readmore

Technical Details

Engraving Burr Cutter 3/32" Shank - DSB-04

2011-01-02T16:10:00.001-08:00

Review Engraving Burr Cutter 3/32" Shank - DSB-04

Buy Cheap Engraving Burr Cutter 3/32" Shank - DSB-04 From Here Now!
A high-speed engraving cutter designed for precision engraving, made in Swiss, 3/32" (2.4mm) shank. Ideal for detail engraving, carving and routing in wood, fiberglass, ceramics, plastic, jewelry and soft metals.
Readmore

Technical Details

Ingersoll-Rand EP50K Ep50k Pencil Kit Engraving Pencil Kit

2010-12-29T14:02:00.001-08:00

Review Ingersoll-Rand EP50K Ep50k Pencil Kit Engraving Pencil Kit

Buy Cheap Ingersoll-Rand EP50K Ep50k Pencil Kit Engraving Pencil Kit From Here Now!
Etchers, Engravers & Accessories Type: Air Engraving Pen Kit Strokes per Minute: 18750 Length: 5-5/8
Readmore

Technical Details

Amana 45731 V Groove Engraving Plexiglass

2010-12-17T09:08:00.001-08:00

Review Amana 45731 V Groove Engraving Plexiglass

Buy Cheap Amana 45731 V Groove Engraving Plexiglass From Here Now!
Amana 45731 V GROOVE ENGRAVING PLEXIGLASSSKU AMA-45731
Readmore

Technical Details

Florida Pneumatic FP-780 Engraving Pen Florida Pneumatic

2010-12-17T09:01:00.001-08:00

Review Florida Pneumatic FP-780 Engraving Pen Florida Pneumatic

Buy Cheap Florida Pneumatic FP-780 Engraving Pen Florida Pneumatic From Here Now!
Pneumatic Engraving Pen Type: Engraving Pen Strokes per Minute: 9000 Length: 5-1/2
Readmore

Technical Details

EGX-360 Rotary Gift Engraving Machine

2010-12-13T12:12:00.001-08:00

Review EGX-360 Rotary Gift Engraving Machine

Buy Cheap EGX-360 Rotary Gift Engraving Machine From Here Now!

Readmore

Technical Details

Woodburning Pen

2010-12-13T12:10:00.001-08:00

Review Woodburning Pen

Buy Cheap Woodburning Pen From Here Now!
The Wall Lenk L23WBK Hobbyist Kit is great for woodburning projects and features a smaller, easier to grip handle that is cool and comfortable to use. A quality tool offered at a very affordable price. The L23WBK Kit includes 18 watt woodburning iron, and three tips.
Readmore

Technical Details

3pc DIAMOND HOLE SAW - CORE DRILL - Set - 1/4" + 5/16" + 3/8"

2010-12-03T09:20:00.001-08:00

Review 3pc DIAMOND HOLE SAW - CORE DRILL - Set - 1/4" + 5/16" + 3/8"

Buy Cheap 3pc DIAMOND HOLE SAW - CORE DRILL - Set - 1/4" + 5/16" + 3/8" From Here Now!

Readmore

Technical Details

Engrave it (Pink) Engraving Tool

2010-11-01T20:09:00.001-07:00

Review Engrave it (Pink) Engraving Tool

Buy Cheap Engrave it (Pink) Engraving Tool From Here Now!
Engrave it (Pink)

Permanently label all of your important items!

Engrave It engraving tool allows you to engrave nearly anything you can imagine on almost any type of surface: wood, metal, plastic, leather, glass and much more. Do you know that Law enforcement won't return stolen property unless its identifiable? Use Engrave It to permanently label and protect your valuables.

Safe and easy to use. Works just like a pen. Engrave your child's lunch box or guard against theft by engraving your MP3 player. Engrave ornaments, silver pieces, lockets, rings and more. Great arts and crafts fun for the whole family.

Personalize your keepsakes, Engrave It is an inexpensive alternative to costly engraving services!

Includes:

1x Pink Engrave-It Engraving Tool
1x Bonus Replacement Tip
Uses 2 AA batteries (NOT included)
Hold the Engrave It like you would a pencil, with your thumb over the control button. Press the control button in with your thumb. Applying slight pressure, press tool down on surface to be engraved. Hold it at a slight angle (like you would a pencil). To turn off simply release thumb pressure from control button.

Works on:

Metal
Steel
Wood
Electronics
Valuables
Collectables
Leather
Computers
And more....
(Safety Note: Always wear protective eyewear when engraving and wash hands after use. It is not recommended that you engrave electronic media such as CD's, DVD's etc because engraving on those materials may damage the media.)

****The Engrave it is PINK and WHITE in color and not blue as pictured- blue one is available in another listing)
Readmore

Technical Details

Chicago Pneumatic CP710 Engraving Pen

2010-11-01T19:57:00.001-07:00

Review Chicago Pneumatic CP710 Engraving Pen

Buy Cheap Chicago Pneumatic CP710 Engraving Pen From Here Now!
Buy from a Reputable, Authorized Chicago Pneumatic Dealer... Buy From MaxTool! Brand New and Factory Sealed Chicago Pneumatic CP710 Engraving Pen Features: Lightweight for easy operation Fine point stylus for precise engraving Cushion finger grip for comfort Low air consumption at only 1 cfm Model Specs Length in. 5.25 Actual Air Consumption @ load cfm 2.7 Air Inlet Thread Size NPTF in. 1/4 Min. Hose Size in. 1/4 Sound Pressure dB(A) 65 Vibration m/s² 10.5Blows per min @90 PSI 14000 Shipping Weight: 3.00 lbs. Warranty One-Year Warranty 30-Day Satisfaction Guarantee
Readmore

Technical Details

- Lightweight for easy operation
- Fine point stylus for precise engraving
- Cushion finger grip for comfort
- Low air consumption at only 1 CFM
- 14,000 blows per minute
See more technical details

"Used to clean fossils" 2009-12-30
By C. Chesney (Arlington, TX)
I used this tool to clean limestone rock off of fossils. It is good for that purpose, and doesn't do as much damage to the fossil as an electric engraving tool like dremel. It is slow work and doesn't remove much at a time, so if you are going to do a lot of this kind of thing get an air scribe.

"Great for fossil fish prep" 2009-12-16
By N. Call (Utah, USA)
Bought this as a low-cost alternative to the chicago when preparing fish in rock from the Green River Formation. It surpassed my expectations, performing even better than the Chicage had done. I used it to prepare a 18" Diplommystus and it was incredible.

Dremel 290-01 1.15 Amp 7,200 Stroke Per Minute Engraver includes Letter and Number Template

2010-10-19T13:11:00.001-07:00

Review Dremel 290-01 1.15 Amp 7,200 Stroke Per Minute Engraver includes Letter and Number Template

Buy Cheap Dremel 290-01 1.15 Amp 7,200 Stroke Per Minute Engraver includes Letter and Number Template From Here Now!
Engrave or decorate a wide variety of materials including metal, plastic, glass, ceramic, wood and leather. Includes soft-grip body, replaceable carbide engraving point and variable-stroke control that lets you etch fine lines or deep grooves.
Readmore

Technical Details

- Ideal for decorative engraving or adding security by personalizing your valuables
- Engraves on metal, glass, wood, plastic, and ceramic
- 5-position calibrated stroke adjustment dial regulates engraving depth
- Includes replaceable carbide steel engraving point
- Letter/Number template included
See more technical details

"Responds to the other review on here." 2010-09-24
By bustedcondom
FYI, It does come with a ingraving bit. I read your review and thought it didn't come with one. So I made a mistake of buying one on ebay for 7 bucks before this ingraver arrived. 7 bucks wasted. Thanks!

"Assembly required" 2010-08-31
By Donna R (wallingford, pa United States)
It arrived 99.9 % assembled except for the major part- The engraving bit. To assemble it you need to loosen one of the smallest screws I have ever seen, Insert the bit and then tighten. No tool to loosen this small screw was supplied. So sadly instead of being able to use it from the package I need to head to the depot to find the world's smallest screw driver. I don't have one that small in the tool box. Rated 1 for this inconvenience.

"Great Engraver" 2010-07-12
By PAC (Campton, New Hampshire)
Works great for branding laptops and other mobile devices here at our school. The stencil wasn't very helpful, bur freehand works just fine...as long as you have good handwriting! Great product. Only con is that it is on the loud side.

"Remember to order the engraver drill bits" 2010-04-03
By Linny (Washington State, USA)
When I received my engraver, I was all set to start engraving all our cell phones, ipods, etc. Unfortunately, there were no engraving drill bits included (it came with a template, so I figured it would have at least one bit). They are purchased separately. I wish I would have known that so I could have ordered at the same time and saved on shipping.

Dremel 9924 Engraver Carbide Point Bit

2010-10-04T11:20:00.001-07:00

Review Dremel 9924 Engraver Carbide Point Bit

Buy Cheap Dremel 9924 Engraver Carbide Point Bit From Here Now!
Electric Engraver Type: Replacement Carbide Engraving Point For Use With: Dremel 290-01 Engraver
Readmore

Technical Details

- Carbide point for the Dremel Engraver
- Use this point for normal applications
See more technical details

"Engraving's Great!" 2010-09-23
By MI SciGuy (Michigan)
To protect your property, this is a hand item. You must use it with your engraver, however!

"Carbide engraver point" 2010-05-06
By Larry H. Akin (near Chickasawhatchee Ga USA)
It is a carbide engraver point and it marks metals quite well. Sort of expensive but it should last for many years.

Chicago Pneumatic CP710 Engraving Pen

2010-10-04T08:23:00.001-07:00

Technical Details

10pc Engraving Cutters Set 3/32" Shank w/Small Head

2010-10-04T08:17:00.001-07:00

Review 10pc Engraving Cutters Set 3/32" Shank w/Small Head

Buy Cheap 10pc Engraving Cutters Set 3/32" Shank w/Small Head From Here Now!
The 10pc high-speed engraving cutters set is made in Switzerland and designed for precision engraving, 3/32" (2.4mm) shank. They are ideal for detail engraving, carving and routing in wood, fiberglass, ceramics, plastic, jewelry and soft metals.
Readmore

Technical Details

INSCRIBLIO ENGRAVING TOOL

2010-10-03T21:57:00.001-07:00

Review INSCRIBLIO ENGRAVING TOOL

Buy Cheap INSCRIBLIO ENGRAVING TOOL From Here Now!
SuppliesNet item (EKET01)
Readmore

Technical Details

- Satisfaction Ensured
- Design is stylish and innovative.
- Functionality that is Unbeatable.
See more technical details

"immediate fun" 2009-02-10
By D. Cardinal (Farmington, NH)
I bought this for a 14 year old for Xmas. She opened it and loved it. I had found an article in a magazine on glass etching and it had this product as the tool they used for the crafts.I had included all the necessary items to do the craft projects so she could immediately begin having fun. That is exactly what happened, she had fun, she engraved or etched all kinds of designs and letters. I was very please with how well it worked and how much detail she could put into her projects because of the ease inwhich the engraving tool worked. I was very pleased with my purchase

"love love love!!" 2008-12-17
By R. Mitchell (wilson nc)
I loved the inscriblio!! My family has gotten so huge, and we have decided to do "secret santas," but I still wanted to do a little something for everyone, so I bought the inscriblio, and bought enough wine glasses and beer mugs for my friends and family ($1 each at dollar tree!) and engraved names and easy pictures into each one... The inscriblio lasted through all 32 glasses and mugs!!! LOVED IT!.. your hand gets tired after using it for a while though!!!

Images Product

Buy INSCRIBLIO ENGRAVING TOOL Now
Buy INSCRIBLIO ENGRAVING TOOL |
Cheap INSCRIBLIO ENGRAVING TOOL | Low Price INSCRIBLIO ENGRAVING TOOL | Best INSCRIBLIO ENGRAVING TOOL | Order INSCRIBLIO ENGRAVING TOOL | Good INSCRIBLIO ENGRAVING TOOL | Lowest INSCRIBLIO ENGRAVING TOOL | Save INSCRIBLIO ENGRAVING TOOL | Discount INSCRIBLIO ENGRAVING TOOL | Purchase INSCRIBLIO ENGRAVING TOOL | Shop INSCRIBLIO ENGRAVING TOOL | Buying INSCRIBLIO ENGRAVING TOOL | Where INSCRIBLIO ENGRAVING TOOL

Engrave it (Blue) Engraving Tool

2010-10-03T21:55:00.003-07:00

Review Engrave it (Blue) Engraving Tool

Buy Cheap Engrave it (Blue) Engraving Tool From Here Now!
Engrave it (Blue)

Permanently label all of your important items!

Engrave It engraving tool allows you to engrave nearly anything you can imagine on almost any type of surface: wood, metal, plastic, leather, glass and much more. Do you know that Law enforcement won't return stolen property unless its identifiable? Use Engrave It to permanently label and protect your valuables.

Safe and easy to use. Works just like a pen. Engrave your child's lunch box or guard against theft by engraving your MP3 player. Engrave ornaments, silver pieces, lockets, rings and more. Great arts and crafts fun for the whole family.

Personalize your keepsakes, Engrave It is an inexpensive alternative to costly engraving services!

Includes:

1x Blue Engrave-It Engraving Tool
1x Bonus Replacement Tip
Uses 2 AA batteries (NOT included)
Hold the Engrave It like you would a pencil, with your thumb over the control button. Press the control button in with your thumb. Applying slight pressure, press tool down on surface to be engraved. Hold it at a slight angle (like you would a pencil). To turn off simply release thumb pressure from control button.

Works on:

Metal
Steel
Wood
Electronics
Valuables
Collectables
Leather
Computers
And more....
(Safety Note: Always wear protective eyewear when engraving and wash hands after use. It is not recommended that you engrave electronic media such as CD's, DVD's etc because engraving on those materials may damage the media.)
Readmore

Technical Details

- Permanently label all of your important items!
- engrave nearly anything you can imagine on almost any type of surface wood, metal, plastic, etc
See more technical details

"Very disappointing" 2010-05-06
By Reader (Georgia, USA)
I managed to get my phone number scratched into a couple of items legibly, but that's about it. It is hardly visible on some plastics. Very awkward to use, holding in the button while writing with it. Glad I only wasted 7 bucks on it on sale.

Proxxon 38635 Complete Engraving Kit with Trial Glass

2010-10-03T21:55:00.001-07:00

Review Proxxon 38635 Complete Engraving Kit with Trial Glass

Buy Cheap Proxxon 38635 Complete Engraving Kit with Trial Glass From Here Now!
The kit comes with the tried and tested high speed engraving tool GG 12 (12-18V, 20,000 rpm, fitted in a ball bearing assembly) powered by the included AC adapter (12V, 0.5A), patterns and instruction booklet as well as all necessary bits: 1 each 1/32" and 5/64" (1.0 and 1.8 mm) diamond grinding bits with spherical head for engraving and line work as well as 1 each silicon carbide grinding bits in both conical and bullet shape for frosting glass. Carve and engrave the finest details in metal, wood, plastic and glass. For more details on the tool see Engraving Tool GG 12 - 28592. Note: The unit requires a 12 V power source. Please see our AC Adapters NG 2/S and NG 5/E for details. Proxxon tools come with a 2 year factory warranty.
Readmore

Technical Details

9 Watt Electric Engraver w/ Carbide Tip -Engraving Tool

2010-09-25T12:54:00.003-07:00

Review 9 Watt Electric Engraver w/ Carbide Tip -Engraving Tool

Buy Cheap 9 Watt Electric Engraver w/ Carbide Tip -Engraving Tool From Here Now!

New Electric Engraver

Write, Draw, or engrave on any material!

Volts: 120V
Frequency: 50/60 HZ
Power: 9 Watts
Includes carbide tip
Mark valuable to protect against theft!
NEW

Readmore

Technical Details

Dremel 290-05 120-Volt Industrial Engraver

2010-09-25T12:54:00.001-07:00

Review Dremel 290-05 120-Volt Industrial Engraver

Buy Cheap Dremel 290-05 120-Volt Industrial Engraver From Here Now!
290-05 Style: Inc. (3) 9924 Carbide Engraving Points, Price Each This item features: -Stroke adjustment dial regulates engraving depth. -Light and compact design for precision engraving. -Engraves metal, glass, wood, plastic, and ceramics. -Soft grip has been added to provide extra control and comfort. -Packed in a plastic tube. -Voltage: 115.00 VAC. -Frequency: 60.0 Hz. -Cycle Rate: 7200 strokes/min [Max]. -Power Source: Electric. -Wt.: 0.85 lb.
Readmore

Technical Details

- Amperage: 0.2 Amps
- Hertz: 60 Hz
- Speed: 7,200 spm
- Voltage: 115 V AC, 60Hz
See more technical details

"High quality, but a bit large" 2009-09-28
By Moderate American Man (Arizona, USA)
I have used Inscriblio engravers, poor quality chinese engravers, and now this Dremel engraver. The Dremel is easily the highest quality, and best value. My only complaint is that it's size and shape make it harder to use then the other light weight engravers. However I think I will get used to it, and it seems obvious that it will last much, much longer then either of the other engravers I have used in the past.

"Very disappointed" 2009-04-22
By Jamie R. Deem (Orlando, FL)
I bought this engraver to mark all of my tools with serial numbers and my name. On the very first tool, after engraving the serial number, the diamond tip began to loosen and slip out. I reached for the included little wrench with a standard screwdriver tip on one end to tighten the set screw that holds the diamond tip in the tool. I tried to use the screwdriver tip to tighten the slotted set screw and quickly discovered that the provided tool was too thick to fit into the groove in the set screw. I was a little miffed, but just walked over to a benchtop polishing wheel to remove a small amount of steel from the tool so that it would fit in the screw for which it was made. When I returned to the engraver to tighten the set screw the tool fit perfectly, and with one turn the screw, all the threads stripped out of the tool, not off the set screw. The set screw is just fine, but the metal that was threaded for it to go into is made of a metal so soft that it cannot withstand a single turn of the set screw that is essential to hold the diamond tip in place. I'm still rather incredulous that this tool would be made so poorly; perhaps they had a bad batch that got out on the market. If you already have one, with a soft metal housing for the diamond tip, you might wish to try some Locktite on the set screw and perhaps even the diamond tip where it contacts the soft metal housing. Be sure to take note of the different strengths of Locktite so that the bottle or tube you buy will be effective. My engraver will be going back, and I do not think I will be purchasing any more Dremel products in the near future.

"good tool" 2008-10-28
By A. Walk
I have only used this tool a few times, but it has worked very well.

I was surprised at how thick of a piece of metal it will make a cut in.

Dremel 9929 Engraver Diamond Point Bit

2010-09-25T12:44:00.001-07:00

Review Dremel 9929 Engraver Diamond Point Bit

Buy Cheap Dremel 9929 Engraver Diamond Point Bit From Here Now!
Electric Engraver Type: Diamond Engraving Point For Use With: Dremel 290-01 Engraver
Readmore

Technical Details

- Additional diamond point for the Dremel 290 Engraver
- Use this point for continuous duty or commercial work
- Can also be used for decorative engraving
- Works on steel, chrome, titanium, granite, and other hard substrates
- 3.2-by-1.9-by-0.2-inches at 0.8-ounces
See more technical details

"Doesn't work on stone" 2010-06-05
By Bob
Tried to engrave childs name on a rock....didn't work. Pretty much wore out the tip and could wipe the name of with my hand when it was finished

"Engraver bit" 2010-05-12
By Ray B. Bedwell
Purchased this to engrave an id number on our items. Works great and engraves on everything. Great Purchase

"Let's Engrave" 2010-05-10
By Lawrence Mackenzie
This bit is much easier to deal with than the carbide bit. It produces a fine line and (hopefully) should last longer than its carbide counter point.

"bit" 2009-10-04
By T. North
Recieved quickly. Have not used it yet but it was packaged well. Good company to order from.

"A tatoo needle for Superman? Oh, yeah!" 2008-08-29
By W. L. Cummins (Santa Cruz, CA, USA)
The original needle that came with my Dremel engraver was tough and no match for plastic or fiberglass gelcoat or wood, but it began to blunt after a number of metal applications. Enter The Daimond Point! After countless engravings on steel, chrome, titanium, granite, and other hard substrates (anodized or hardened aluminum not even included in this category), it has retained its sharp, little point. You could tattoo Clark Kent with this dude! Worth every penny!

Images Product

Buy Dremel 9929 Engraver Diamond Point Bit Now
Buy Dremel 9929 Engraver Diamond Point Bit |
Cheap Dremel 9929 Engraver Diamond Point Bit | Low Price Dremel 9929 Engraver Diamond Point Bit | Best Dremel 9929 Engraver Diamond Point Bit | Order Dremel 9929 Engraver Diamond Point Bit | Good Dremel 9929 Engraver Diamond Point Bit | Lowest Dremel 9929 Engraver Diamond Point Bit | Save Dremel 9929 Engraver Diamond Point Bit | Discount Dremel 9929 Engraver Diamond Point Bit | Purchase Dremel 9929 Engraver Diamond Point Bit | Shop Dremel 9929 Engraver Diamond Point Bit | Buying Dremel 9929 Engraver Diamond Point Bit | Where Dremel 9929 Engraver Diamond Point Bit

Proxxon 28592 12-Volt Engraving Tool GG 12

2010-09-23T07:40:00.001-07:00

Review Proxxon 28592 12-Volt Engraving Tool GG 12

Buy Cheap Proxxon 28592 12-Volt Engraving Tool GG 12 From Here Now!
Engraving Tool GG 12 The unit is also available by itself and comes with 1 diamond bit with spherical head size 5/64" (1.8 mm). Engrave for hours without fatigue. Our 12 V powered high-speed engraving tool lets you realize the finest details in glass, metal, wood, and plastic. It has the size and weight of a very fine writing instrument. You'll have more control than you ever thought possible. It allows you to work precisely. Note:The unit requires a 12 V power source. Please see our AC Adapters NG 2/S and NG 5/E for details. Proxxon tools come with a 2 year factory warranty.
Readmore

Technical Details

Dremel 689-01 11-Piece Rotary Tool Carving and Engraving Kit

2010-09-18T15:22:00.001-07:00

Review Dremel 689-01 11-Piece Rotary Tool Carving and Engraving Kit

Buy Cheap Dremel 689-01 11-Piece Rotary Tool Carving and Engraving Kit From Here Now!
Dremel 689-01 11 Piece Carving/Engraving Kit
Readmore

Technical Details

- Comes with 11 assorted carving and engraving accessories
- Features 4 engraving cutters and 4 grinding stones along with a collet bit
- Includes a diamond wheel point and diamond carving bit
- Packaged in a convenient mini accessory case
- A great addition to your Dremel accessory line-up
See more technical details

"Never Enough Dremel Accessories" 2010-07-03
By Robin Islam (Drexel Hill, PA)
Just as I have mentioned in my other Dremel accessory reviews on Amazon, one can never own enough Dremel accessories. As a home owner, it's great to have a Dremel around for minor home repairs or minor house projects. It's hard to find accessories like these in traditional retail stores like Home Depot or Lowes.

"Another happy father in-law" 2010-05-31
By Todd M. Smith
This is another gift that helps keep my father in-law busy in his tinkering. He likes it, thats the goal.

"Dremel kit" 2009-09-16
By C. A. Hawes (Carmichael, CA United States)
the kit arrived promptly and in brand new condition. I have not had time to use it yet.

"Dremel 689-01 Carving kit" 2009-08-23
By J.R. (Florida, USA)
This is a great value kit!!! the small carving pieces are for fine detail work, and i recommend the use of those devices for a flexshaft. They are almost the same thing that foredom kit AK65, the bonus on this kit are the diamond covered bits which are great for wood, glass etc. And the silicon carbide stones are great for glass etc. I am very satisfied with Amazon.

B1/4 Ball Shaped Diamond Bur - Approx. Head Diameter 0.9mm - 1/16" Shank (Made In USA)

2010-09-16T09:08:00.001-07:00

Review B1/4 Ball Shaped Diamond Bur - Approx. Head Diameter 0.9mm - 1/16" Shank (Made In USA)

Buy Cheap B1/4 Ball Shaped Diamond Bur - Approx. Head Diameter 0.9mm - 1/16" Shank (Made In USA) From Here Now!
Lasco's 1/16" B1/4 Diamond Bur is great for carving, etching, or engraving all types of materials. Lasco's burs work great on all types of glass, stone, metal, wood, ceramic, tile, and more... The B1/4 also works great for drilling small holes in thin material. Lasco's high quality diamond burs are made in the USA out of 100% Natural Diamond (not synthetics), and are medical grade. You can run our 1/16" Burs at over 400,000 RPM.
Readmore

Technical Details

Electric Engraver

2010-09-15T16:59:00.001-07:00

Review Electric Engraver

Buy Cheap Electric Engraver From Here Now!
"Versatile electric tool engraves on metal, wood, plastic and glass!
· 110 V, 60 HZ, 12 Watts
· Variable speed: 0 - 7200 RPM
· 6 1/4'' tool length
· Use it to create custom designs, add detail or identify items
· Includes carbide top"
Readmore

Technical Details

Ingersoll-Rand EP50 Ep-50 Pencil Engraving Pencil

2010-09-15T08:47:00.001-07:00

Review Ingersoll-Rand EP50 Ep-50 Pencil Engraving Pencil

Buy Cheap Ingersoll-Rand EP50 Ep-50 Pencil Engraving Pencil From Here Now!
Etchers, Engravers & Accessories Type: Air Engraving Pen Strokes per Minute: 18750 Length: 5-5/8 Contents: Engraving Pen w/ Medium Point Stylus
Readmore

Technical Details

Chicago Pneumatic Air Scribe # CP 9361

2010-09-15T08:42:00.001-07:00

Technical Details

Engraving Burr Cutter 3/32" Shank - DSB-06

2010-09-09T18:21:00.001-07:00

Review Engraving Burr Cutter 3/32" Shank - DSB-06

Buy Cheap Engraving Burr Cutter 3/32" Shank - DSB-06 From Here Now!
A high-speed engraving cutter designed for precision engraving, made in Swiss, 3/32" (2.4mm) shank. Ideal for detail engraving, carving and routing in wood, fiberglass, ceramics, plastic, jewelry and soft metals.
Readmore

Technical Details

Engraving Burr Cutter 3/32" Shank - DSB-10

2010-09-09T01:33:00.001-07:00

Review Engraving Burr Cutter 3/32" Shank - DSB-10

Buy Cheap Engraving Burr Cutter 3/32" Shank - DSB-10 From Here Now!
A high-speed engraving cutter designed for precision engraving, made in Swiss, 3/32" (2.4mm) shank. Ideal for detail engraving, carving and routing in wood, fiberglass, ceramics, plastic, jewelry and soft metals.
Readmore

Technical Details

Monogrammed Stainless Steel Shovel - Crafted By Hand in Idaho with Ash Wood Handle - Hand Cut Engraving Can Include up to 16 Letters to Name Your House, Pet, Farm, Etc - Great for Commemorating New Ventures

2010-09-08T01:24:00.001-07:00

Review Monogrammed Stainless Steel Shovel - Crafted By Hand in Idaho with Ash Wood Handle - Hand Cut Engraving Can Include up to 16 Letters to Name Your House, Pet, Farm, Etc - Great for Commemorating New Ventures

Buy Cheap Monogrammed Stainless Steel Shovel - Crafted By Hand in Idaho with Ash Wood Handle - Hand Cut Engraving Can Include up to 16 Letters to Name Your House, Pet, Farm, Etc - Great for Commemorating New Ventures From Here Now!
Not only should you have one for yourself, but this shovel will become a cherished gift for your favorite gardener or homeowner. Made one by one by a craftsman farmer in Idaho it's made to stand years of use and abuse. Because it is handmade you have the opportunity to have your name (or farmhouse name) and the year hand stamped for an extra $20 charge.
Readmore

Technical Details

Engraving Burr Cutter 3/32" Shank - DSB-05

2010-09-07T22:49:00.001-07:00

Review Engraving Burr Cutter 3/32" Shank - DSB-05

Buy Cheap Engraving Burr Cutter 3/32" Shank - DSB-05 From Here Now!
A high-speed engraving cutter designed for precision engraving, made in Swiss, 3/32" (2.4mm) shank. Ideal for detail engraving, carving and routing in wood, fiberglass, ceramics, plastic, jewelry and soft metals.
Readmore

Technical Details

Engraving Burr Cutter 3/32" Shank - DSB-02

2010-09-07T22:46:00.001-07:00

Review Engraving Burr Cutter 3/32" Shank - DSB-02

Buy Cheap Engraving Burr Cutter 3/32" Shank - DSB-02 From Here Now!
A high-speed engraving cutter designed for precision engraving, made in Swiss, 3/32" (2.4mm) shank. Ideal for detail engraving, carving and routing in wood, fiberglass, ceramics, plastic, jewelry and soft metals.
Readmore

Technical Details

Engraving Burr Cutter 3/32" Shank - DSB-03

2010-09-07T12:24:00.001-07:00

Review Engraving Burr Cutter 3/32" Shank - DSB-03

Buy Cheap Engraving Burr Cutter 3/32" Shank - DSB-03 From Here Now!
A high-speed engraving cutter designed for precision engraving, made in Swiss, 3/32" (2.4mm) shank. Ideal for detail engraving, carving and routing in wood, fiberglass, ceramics, plastic, jewelry and soft metals.
Readmore

Technical Details

Engraving Burr Cutter 3/32" Shank - DSB-01

2010-09-07T12:23:00.001-07:00

Review Engraving Burr Cutter 3/32" Shank - DSB-01

Buy Cheap Engraving Burr Cutter 3/32" Shank - DSB-01 From Here Now!
A high-speed engraving cutter designed for precision engraving, made in Swiss, 3/32" (2.4mm) shank. Ideal for detail engraving, carving and routing in wood, fiberglass, ceramics, plastic, jewelry and soft metals.
Readmore

Technical Details

Engraving Burr Cutter 3/32" Shank - DSB-07

2010-09-06T07:03:00.001-07:00

Technical Details

Air Engraving Pens Style: Wt. 5 oz, Price Each

2010-09-06T03:23:00.001-07:00

Review Air Engraving Pens Style: Wt. 5 oz, Price Each

Buy Cheap Air Engraving Pens Style: Wt. 5 oz, Price Each From Here Now!
EP50 Style: Wt. 5 oz, Price Each This item features: -Knurled zoom throttle provides positive control. -Steel housing dampens vibration, improves operator control. -Variable speed permits tool to be used on a wide selection of materials. -Carbide tipped stylus holds percussive point. -Easy to repair, reducing down-time. -Three sets of tool flats eliminate need for special repair tools. -Cycle Rate: 18750 strokes/min [Max]. -Length: 5 5/8 in. -Center to Side Distance: 5/16 in. -Inlet Size: 1/8 in (NPT). -Hose Size: 15/16 in. -Control Type: Mechanical Variable. -Type: Engraving Pen. -Inc.: Carrying Case, (3) Assorted Styluses, 6 ft. Hose - Price is for 1 Kit.
Readmore

Technical Details

Engraving Burr Cutter 3/32" Shank - DSB-08

2010-09-04T18:11:00.001-07:00

Technical Details

Engraving Burr Cutter 3/32" Shank - DSB-04

2010-09-04T16:36:00.001-07:00

Technical Details

Air Engraving Pens Style: Inc. Carrying Case, (3) Assorted Styluses, 6 ft. H

2010-09-03T19:33:00.001-07:00

Review Air Engraving Pens Style: Inc. Carrying Case, (3) Assorted Styluses, 6 ft. H

Buy Cheap Air Engraving Pens Style: Inc. Carrying Case, (3) Assorted Styluses, 6 ft. H From Here Now!
EP50K Style: Inc. Carrying Case, (3) Assorted Styluses, 6 ft. H This item features: -Knurled zoom throttle provides positive control. -Steel housing dampens vibration, improves operator control. -Variable speed permits tool to be used on a wide selection of materials. -Carbide tipped stylus holds percussive point. -Easy to repair, reducing down-time. -Three sets of tool flats eliminate need for special repair tools. -Cycle Rate: 18750 strokes/min [Max]. -Length: 5 5/8 in. -Center to Side Distance: 5/16 in. -Inlet Size: 1/8 in (NPT). -Hose Size: 15/16 in. -Control Type: Mechanical Variable. -Type: Engraving Pen. -Inc.: Carrying Case, (3) Assorted Styluses, 6 ft. Hose - Price is for 1 Kit.
Readmore

Technical Details

Chicago Pneumatic RP9160 1/4" Npt 32,400bpm Compact Engraving Pen

2010-09-03T15:08:00.001-07:00

Review Chicago Pneumatic RP9160 1/4" Npt 32,400bpm Compact Engraving Pen

Buy Cheap Chicago Pneumatic RP9160 1/4" Npt 32,400bpm Compact Engraving Pen From Here Now!
Pneumatic Compact Engraving Pens Type: Air Engraving Pen Strokes per Minute: 32400 Length: 5.800 In. Power Source: Pneumatic Air Inlet Size: 1/4
Readmore

Technical Details

Amana 45731 V Groove Engraving Plexiglass

2010-09-03T14:32:00.001-07:00

Review Amana 45731 V Groove Engraving Plexiglass

Buy Cheap Amana 45731 V Groove Engraving Plexiglass From Here Now!

Readmore

Technical Details

Florida Pneumatic FP-780 Engraving Pen Florida Pneumatic

2010-09-02T14:23:00.001-07:00

Technical Details

Amana 45730 V Groove For Engraving 1/4"Shk

2010-09-01T06:06:00.001-07:00

Review Amana 45730 V Groove For Engraving 1/4"Shk

Buy Cheap Amana 45730 V Groove For Engraving 1/4"Shk From Here Now!

Readmore

Technical Details

Amana 45782 V Groove Engraving 1/4 Dia.

2010-09-01T06:02:00.001-07:00

Review Amana 45782 V Groove Engraving 1/4 Dia.

Buy Cheap Amana 45782 V Groove Engraving 1/4 Dia. From Here Now!
For fine-line ?engraving? in wood and composite materials, use either of these compact bits. Two-flute configuration and modest length (which minimizes vibration) combine to produce crisp, clean cuts.
Readmore

Technical Details

Lasco's Starter Set - 12 pcs Diamond Burs 3/32" Shank (Made in the USA)

2010-09-01T06:00:00.001-07:00

Review Lasco's Starter Set - 12 pcs Diamond Burs 3/32" Shank (Made in the USA)

Buy Cheap Lasco's Starter Set - 12 pcs Diamond Burs 3/32" Shank (Made in the USA) From Here Now!
Lasco's Starter Set is a great beginner set for stone carving. It contains an assortment of 12 Lasco Diamond Burs in 150 Grit.
Readmore

Technical Details

EGX-360 Rotary Gift Engraving Machine

2010-09-01T05:59:00.001-07:00

Review EGX-360 Rotary Gift Engraving Machine

Buy Cheap EGX-360 Rotary Gift Engraving Machine From Here Now!

Readmore

Technical Details

Dremel 109 Engraving Cutter, 3/32" Shank

2010-08-31T08:42:00.001-07:00

Review Dremel 109 Engraving Cutter, 3/32" Shank

Buy Cheap Dremel 109 Engraving Cutter, 3/32" Shank From Here Now!
Cutters Shape: Inverted Cone Cutter Diameter: 1/16 Material: Carbon Steel
Readmore

Technical Details

Florida Pneumatic FP-780 Engraving Pen Florida Pneumatic

2010-08-23T07:46:00.007-07:00

Technical Details

Proxxon 28920 Glass Engraving Set, 8-Piece

2010-08-23T07:46:00.005-07:00

Review Proxxon 28920 Glass Engraving Set, 8-Piece

Buy Cheap Proxxon 28920 Glass Engraving Set, 8-Piece From Here Now!

Readmore

Technical Details

Dremel 112 Engraving Cutter, 3/32" Shank

2010-08-23T07:46:00.003-07:00

Review Dremel 112 Engraving Cutter, 3/32" Shank

Buy Cheap Dremel 112 Engraving Cutter, 3/32" Shank From Here Now!
Ideal for engraving, carving, routing in wood, fibre, plastic and soft materials everything except hardened materials. All have 3 32" shanks.
Readmore

Technical Details

Air Engraving Pens

2010-08-23T07:46:00.001-07:00

Review Air Engraving Pens

Buy Cheap Air Engraving Pens From Here Now!
5980 This item features: -Non-marring cover over leader hose. -High quality stainless steel housing. -Replaceable engraving points. -Cycle Rate: 13000 blows/min. -Inlet Size: 1/4 in (NPT). -Hose Length: 59.0 in. -Control Type: Twist Throttle. -Includes: 45 , 30 , 15 Carbide Tipped Points. -Price is for 1 Each.
Readmore

Technical Details

Grip 86450 105-Piece Rotary Tool Accessory Engraving and Grinding Kit

2010-08-23T07:44:00.001-07:00

Review Grip 86450 105-Piece Rotary Tool Accessory Engraving and Grinding Kit

Buy Cheap Grip 86450 105-Piece Rotary Tool Accessory Engraving and Grinding Kit From Here Now!
Ideal for cutting, carving, sanding, grinding, cleaning, and polishing For use on all rotary tools that accept 1/8" and 3/32" shanked accessories Includes 3 aluminum oxide grinding stones, 6 silicon carbide grinding stones, 3 nylon brushes (7/8" circular, 9/16" cup, 3/16" end), 3 carbon steel brushes (3/4" circular, 5/8" cup, 3/16" end), 18" x 3/8" high speed steel cutter, 2 high speed steel engraver cutters (3/32", 5/64"), 2 screw mandrels, 10 felt polishing wheels (5 pc 1", 5 pc 1/2"), 5 pc 3/8" felt polishing tips, 24 sanding bands (12 coarse, 12 fine), 2 drum sanders, 10 pc 1-1/4" cut-off wheels, 27 pc 15/16" cut-off discs, dressing stone, 36 pc 3/4" sanding discs, 2 diamond wheel points (cylinderical & spherical), and birch wood storage box
Readmore

Technical Details

Dremel 110 Engraving Cutter, 3/32" Shank

2010-08-23T07:24:00.003-07:00

Review Dremel 110 Engraving Cutter, 3/32" Shank

Buy Cheap Dremel 110 Engraving Cutter, 3/32" Shank From Here Now!
Cutters Shape: Inverted Cone Cutter Diameter: 5/64 Material: Carbon Steel
Readmore

Technical Details

Wall Lenk L96E Engraving Tool 120 VAC

2010-08-23T07:24:00.001-07:00

Review Wall Lenk L96E Engraving Tool 120 VAC

Buy Cheap Wall Lenk L96E Engraving Tool 120 VAC From Here Now!

Readmore

Technical Details

- 120VAC, 60Hz Engraving Tool
- Reciprocating Motor- 7200 Strokes Per Minute
- Permanent Marking
- NO Fade, Smearing, or Erasing
- Tungsten Carbide Tip
See more technical details

Woodburning Pen

2010-08-19T21:26:00.001-07:00

Technical Details

3pc DIAMOND HOLE SAW - CORE DRILL - Set - 1/4" + 5/16" + 3/8"

2010-08-18T13:45:00.001-07:00

Review 3pc DIAMOND HOLE SAW - CORE DRILL - Set - 1/4" + 5/16" + 3/8"

Buy Cheap 3pc DIAMOND HOLE SAW - CORE DRILL - Set - 1/4" + 5/16" + 3/8" From Here Now!

Readmore

Technical Details

Engraving Pen

2010-08-17T14:28:00.001-07:00

Review Engraving Pen

Buy Cheap Engraving Pen From Here Now!

Readmore

Technical Details

Chicago Pneumatic (CP 710) Engraving Pen

2010-08-17T01:17:00.001-07:00

Review Chicago Pneumatic (CP 710) Engraving Pen

Buy Cheap Chicago Pneumatic (CP 710) Engraving Pen From Here Now!
Features and Benefits:

Lightweight for easy operation
Fine point stylus for precise engraving
Cushion finger grip for comfort
Low air consumption at only 1 CFM
14,000 blows per minute

This engraving pen is lightweight at only 1-1/4 lbs. With precise engraving, this pen makes a great gift!
Readmore

Technical Details

Dremel 111 Engraving Cutter, 3/32" Shank

2010-08-16T08:37:00.001-07:00

Review Dremel 111 Engraving Cutter, 3/32" Shank

Buy Cheap Dremel 111 Engraving Cutter, 3/32" Shank From Here Now!
Cutters Shape: Cylinder Cutter Diameter: 1/32 Material: Carbon Steel
Readmore

Technical Details

Micro Motor Detail Carver

2010-08-14T06:28:00.001-07:00

Review Micro Motor Detail Carver

Buy Cheap Micro Motor Detail Carver From Here Now!
This miniature rotary power carver features a powerful micro motor built into the handpiece, so there isnt an awkward flexible shaft to restrict your hand movement. This small unit fits comfortably in your hand and is light enough to allow it to be held almost like a pencil.
Readmore

Technical Details

10pc Engraving Cutters Set 3/32" Shank w/Large Head

2010-08-13T18:24:00.001-07:00

Review 10pc Engraving Cutters Set 3/32" Shank w/Large Head

Buy Cheap 10pc Engraving Cutters Set 3/32" Shank w/Large Head From Here Now!
The 10pc engraving cutters are made in Switzerland and designed for precision engraving, 3/32" (2.4mm) shank. They are ideal for detail engraving, carving and routing in wood, fiberglass, ceramics, plastic, jewelry and soft metals.
Readmore

Technical Details

Dremel 106 Engraving Cutter, 3/32" Shank

2010-08-11T00:26:00.001-07:00

Review Dremel 106 Engraving Cutter, 3/32" Shank

Buy Cheap Dremel 106 Engraving Cutter, 3/32" Shank From Here Now!
Cutters Shape: Ball Cutter Diameter: 1/16 Material: Carbon Steel
Readmore

Technical Details

Ideal 45-359 Carbide DualScribe Fiber Optic Scribe, Black

2010-08-09T14:45:00.001-07:00

Review Ideal 45-359 Carbide DualScribe Fiber Optic Scribe, Black

Buy Cheap Ideal 45-359 Carbide DualScribe Fiber Optic Scribe, Black From Here Now!

Readmore

Technical Details